Emptying the Liter-Robot. Press the Empty buton to cycle the Globe clockwise, which will allow the liter to fall through the Waste Port and into the Waste Drawer for easy disposal. If liter remains in the Globe, sweep the granules toward the Waste Port. Press any buton to return the Globe to the Home position.May 25, 2023 ... If the light bar on your Litter-Robot 4 flashes white for a brief second when you push any button, this indicates that the unit is actively ...In today’s fast-paced world, keeping our homes clean can be a challenge. That’s where robot vacuums and mops come in handy. These innovative devices can save you time and effort by...Litter-Robot 3: Yellow flashing slowly (Cat sensor) The Litter-Robot 3 is equipped with a cat sensor that detects when a cat enters and exits the globe. If a cycle is interrupted or the bonnet is removed, the unit will stop, and the yellow light will flash slowly, about 1x per second. This will also occur if the cat sensor is activated by a cat ...Litter-Robot troubleshooting means learning about Litter-Robot lamps: flashing blue light, beaming cherry light, blue and yellow lights, and more. Last when not least, check for super weight, such as too much litter otherwise waste.Aug 4, 2023 ... Litter-Robot 4 features a Bonnet that covers the Globe and functions as a guard for the Waste Port as the Globe rotates.Litter-Robot 3: Blue light flashing (Drawer full) Litter-Robot 3 is equipped with infrared emitters and sensors, called DFI sensors, located above the waste drawer that check if the drawer is full each time the globe returns to the Home position. Once a full waste drawer is detected, the unit will indicate it is full with a blue flashing light. Litter-Robot 3: Blue light flashing (Drawer full) Litter-Robot 3 is equipped with infrared emitters and sensors, called DFI sensors, located above the waste drawer that check if the drawer is full each time the globe returns to the Home position. Once a full waste drawer is detected, the unit will indicate it is full with a blue flashing light. Litter-Robot 4: Light codes guide. Litter-Robot 4 control panel features 5 buttons and an LED display for easy operation. Blue flashing. If your unit’s light bar is flashing blue, this indicates that the waste drawer is full. Empty the waste drawer, press the Reset button, then press the Cycle button. Learn more.Hi, I have a litter robot 3 in beige that is still under warranty. Today i noticed it was not on, checked the outlet and it works fine for other appliances but the litter robot shows no lights or activity. I’ve tried it in other outlets and with another adapter to no avail. Please advise, it should be covered under warranty. Thanks.Discover how to troubleshoot issues related to the bonnet removal on your Litter-Robot 3. Learn about yellow flashing lights, the wire harness, the night light, and more. ... If your Litter-Robot 3 is displaying a yellow light flashing slowly, this indicates a cycle has been interrupted either by the cat sensor or bonnet removal. Press the Reset button to resume …The Litter-Robot arrives with the automatic night light function enabled. When the light sensor, located in the control panel, detects low-light conditions, the night light turns on automatically. The automatic night light, located in the upper bonnet, is there to help guide your cat to the litter box. A light sensor located above the Cycle ...The Litter-Robot 3 is equipped with a cat sensor that detects when a cat enters and exits the globe. If the cat sensor has been continuously activated for 30 minutes or more, either by a cat that won’t leave the globe or by too much weight in the unit, the timing light will flash red. You will also receive a notification on your phone if you ... Select your Litter-Robot 4. Select the Settings gear in the top right corner. Select Update Network. Follow the steps listed within the app. Once the update is complete, your Litter-Robot should be ready for use. If your unit displays a solid blue light bar, you've been successful. If your unit is not displaying a solid blue light bar, your ... Reply. Share. litterrobot. • 3 mo. ago. If you've got 3 solid blue lights, and 2 flashing yellow, make sure your LR4 is on level ground (not on carpet, a litter mat, a power cord, or leaning against a wall). That light pattern lets you know the Robot or its scale feet are unbalanced. 1.To enter the Automatic Night Light Setting Mode, press and hold the Reset Button button. The Light Bar will indicate the current setting. 1 Green Light displayed → Always OFF. 2 Green Lights displayed → Always ON. 3 Green Lights displayed → Automatic mode. Automatic mode: When the Light Sensor, located in the Control Panel, detects low ...Watch on. The Litter-Robot 3 is equipped with a cat sensor that detects when a cat enters and exits the globe. If the cat sensor has been continuously activated for 30 minutes or more, either by a cat that won’t leave the globe or by too much weight in the unit, the timing light will flash red. You will also receive a notification on your ...Successful: If your Litter-Robot displays a blue light bar, you've been successful. Unsuccessful: If you are still seeing a flashing red light bar, please continue. Firmware update. Whisker can provide updated firmware to your robot with fixes to correct known issues with the unit. We recommend that you always keep your Litter-Robot’s firmware …Watch on. If your Litter-Robot 3 is not powering on, there are several things we need to check. Ensure Litter-Robot is plugged directly into a wall outlet. We do not recommend using an extension cord or power strip. Unplug the power supply from the wall. Confirm that your outlet is working by testing it with a known working device, such as a ...It could be one of these two issues: 1- motor isn’t working anymore and needs to be replaced. 2- the circuit board isn’t working anymore and blocking the whole robot from functioning. We were going towards the second option because the whole robot wasn’t functioning not just the rotation process.Watch on. The Litter-Robot 3 is equipped with a cat sensor that detects when a cat enters and exits the globe. If the cat sensor has been continuously activated for 30 minutes or more, either by a cat that won’t leave the globe or by too much weight in the unit, the timing light will flash red. You will also receive a notification on your ...Preparation. If Litter-Robot 4 has a blue light bar with a yellow blinking light adjacent to the Connect button, this indicates that the unit is in Onboarding mode and waiting to be connected to the app.. You can now proceed with the onboarding process within the Whisker App to finalize connection.. When your Litter-Robot 4 has successfully …Tamil Nadu e-Governance agency (TNeGA) has developed e-Sevai application for online delivery of various citizen centric services of government department to public through …Litter-Robot 3: Yellow and Blue Light (8-Hour Sleep Mode) This mode allows you to deactivate the Cat Sensor for 8 hours so the unit will not cycle automatically. Sleep Mode is useful for units located in bedrooms or areas where you may not want the unit to cycle for a period of 8 hours. The 8-hour period is repeated every 24 hours; the start is ...It could be one of these two issues: 1- motor isn’t working anymore and needs to be replaced. 2- the circuit board isn’t working anymore and blocking the whole robot from functioning. We were going towards the second option because the whole robot wasn’t functioning not just the rotation process.If your Litter-Robot 3 is displaying a yellow light flashing slowly, this indicates a cycle has been interrupted either by the cat sensor or bonnet removal. Press the Reset button to resume the cycle. If your unit returned home and displays a solid blue light, you've been successful. If your unit is not displaying a solid blue light after ...Aside from the main power light, there are three lights on the Litter Robot 3 control panel, which are blue (ready button), yellow (cycling button) and red (timing button). There are …The shield is a possible cause for the three lights flashing fault. We strongly recommend removing the internal shield. If your Litter-Robot was built before February of 2018, you may have an internal shield. The internal shield is not necessary for the unit to function and was removed from the design in March 2018.Litter-Robot 4: Blue and white alternating light bar (Motor fault) Litter-Robot comes equipped with current-sensing capability to detect if the motor is connected and running properly. If the unit displays a blue and white alternating light bar, there is an issue with the motor connection, which affects the rotation of the globe.Apr 10, 2023 ... If litter robot is flashing blue, yellow and red then this means it cannot find the dump position. What the video for the fix!Preparation. Litter-Robot 4 continuously monitors the motor current to ensure the globe is rotating smoothly and is not obstructed. If your unit has a red light bar with partial yellow flashing, this indicates that the globe is most likely jammed or overloaded. The unit will retract and try to continue cycling.If your Litter-Robot 3 is displaying a yellow light flashing slowly, this indicates a cycle has been interrupted either by the cat sensor or bonnet removal. Press and release the Power button to turn the robot ON of OFF. The robot will begin a clean cycle when power is turned on. Press and hold, while at the home position, to enter night light setting mode. Cycle. Press and release the Cycle button to start a clean cycle. If already cycling, press Cycle to pause; press again to resume a cycle. Phone and Chat support available Mon-Fri: 9AM-7PM EST and Sat: 9AM-5PM EST, or submit a ticket anytime. Chat with us 1-877-250-7729 Submit a ticket. Get the most out of your automatic litter box with the latest Litter-Robot 3 manual. Learn more about Litter-Robot 3 setup, lights, troubleshooting, and more.Children learn through play. With a few simple household items and a little bit of help, children can learn the basics of engineering, physics and math while having fun along the w...Robots and artificial intelligence (AI) are getting faster and smarter than ever before. Even better, they make everyday life easier for humans. Machines have already taken over ma...The Robotic Arm - The robotic arm is one of the key developments in industrial robotics. Learn about the robotic arm, its technology and how robotic arms serve heavy industry. Adve...Litter-Robot by using some catnip or a favorite treat. 2. Add a scoop of litter from the old litter box to provide a familiar scent for your cat. 3. Place treats on the step or handle around the Litter-Robot so your cat associates rewards with the unit. 4. Once you notice that your cats have used the Litter-Robot, power the unit on to cycle the ...Litter-Robot 3: All three lights flashing (Globe position fault) Litter-Robot 3: Blue Light Flashing (Drawer Full) Litter-Robot 3: Buttons and Lights. Litter-Robot 3: Cat not detected. Litter-Robot 3: Cat Sensor Troubleshooting. Litter-Robot 3: Control Panel Lockout. Litter-Robot 3: Cycle delay setting.Preparation. Litter-Robot 4 continuously monitors the motor current to ensure the globe is rotating smoothly and is not obstructed. If your unit has a red light bar with partial yellow flashing, this indicates that the globe is most likely jammed or overloaded. The unit will retract and try to continue cycling.The Litter-Robot is equipped with an Anti-Pinch Safety Feature to make the Litter-Robot extra safe for your cat. While cycling, if a potential pinch conditi...Sep 14, 2023 ... If the light bar on your Litter-Robot 4 has a single yellow light that moves with the rotation of the globe, this means your unit is ... The Litter-Robot 3 is equipped with a cat sensor that detects when a cat enters and exits the globe. If the cat sensor has been continuously activated for 30 minutes or more, either by a cat that won’t leave the globe or by too much weight in the unit, the timing light will flash red. You will also receive a notification on your phone if you ... Resolve issues with your Litter-Robot 4 showing a blue light bar with partial yellow flashing. Learn how to troubleshoot excess weight detection, ensure accurate SmartScale™ readings, and update firmware for optimal performance. ... The Litter-Robot is equipped with weight sensors located in the base of the unit that are used to further ...Sep 11, 2018 ... The red blinking light indicates CATS (the cat sensor) is detecting excess weight for more than 2 minutes. In this comprehensive tutorial ...Next, plug the main power cord into a wall outlet. Press the ON/OFF Switch - the Litter-Robot will perform an initialization cycle (this takes about 3 minutes). After completing the cycle, the Globe should be in the “home” position with the green light on. Free: 877-250-7729 www.Litter-Robot.com.Litter-Robot is the highest-rated automatic, self-cleaning litter box for cats. 90-day in-home trial. 1-year warranty. Free shipping*. Designed & assembled in the USA.Whisker's Litter-Robot 4 is a well-designed robotic litter box that eliminates the need to scoop anything ... Blue lights mean the machine is ready to go, red lights mean a cat is detected and all ...Litter-Robot will then perform a Clean cycle and return to the Home position with the blue light bar. After it completes the first cycle, press Cycle again to allow the unit to complete a full cycle. Successful: If your Litter-Robot displays a blue light bar , you've been successful.We finally got a Litter Robot 4 (replaced our LR3) after two months on order and it worked so great for the first three weeks. Now we have the red solid lights of death and nothing will fix it. Have tried all the troubleshooting things, cleaning sensors, removing litter, making sure it’s level. Removed globe and replaced bonnet to try to ... The shield is a possible cause for the three lights flashing fault. We strongly recommend removing the internal shield. If your Litter-Robot was built before February of 2018, you may have an internal shield. The internal shield is not necessary for the unit to function and was removed from the design in March 2018. Litter-Robot 3 is equipped with infrared emitters and sensors, called DFI sensors, located above the waste drawer that check if the drawer is full each time the globe returns to the Home position. Once a full waste drawer is detected, the unit will indicate it is full with a blue flashing light.Easy fix for three solid green lights, and two flashing red, which is cat sensor fault. I just got off the phone with the litter robot experts. The three open circles at the top of the ring have the sensors behind them. and they are very sensitive to obstruction from cat hair or debris. Mine appeared clean, but apparently were not. Simply wipe out the rings with a dry cloth …The Litter-Robot 3 is equipped with a cat sensor that detects when a cat enters and exits the globe. If the cat sensor has been continuously activated for 30 minutes or more, either by a cat that won’t leave the globe or by too much weight in the unit, the timing light will flash red. You will also receive a notification on your phone if you ...The Litter-Robot does not require special litter or proprietary consumables like several other self-cleaning litter boxes on the market. In fact, the Litter-Robot works well with almost any clumping or scoopable litter. ... Automatic Night Light. Guide elderly cats during night time visits. Sleep Mode. Pause automatic cycling in 8-hour increments. Adjustable … Details. Say goodbye to scooping and give your cats clean litter every time they go with Litter-Robot 3, the highest-rated automatic litter box. Purchase includes a 90-day in-home trial, comprehensive coverage with our WhiskerCare™ 1-Year Warranty, and free shipping (excl. AK, HI, PR). Never scoop again®. Helps reduce litter box odors. The Litter-Robot arrives with the automatic night light function enabled. When the light sensor, located in the control panel, detects low-light conditions, the night light turns on automatically. The automatic night light, located in the upper bonnet, is there to help guide your cat to the litter box. Litter-Robot 4 continuously monitors the motor current to ensure the globe is rotating smoothly and is not obstructed. If your unit has a red light bar with partial yellow flashing, this indicates that the globe is most likely jammed or overloaded. You will also receive a notification on your phone if you use the Whisker app. The unit will ... Ambient Light Sensor . Detects ambient light level for automatic dimming of indicator lights. Quantity Lights . Solid White: Number of lights illuminated indicates number portions dispensed or number of Meals depending on the button pressed (Portion or Meals). The Portion setting increments left to right, and the Meals setting increments right ... Litter-Robot 3: Yellow and Blue Light (8-Hour Sleep Mode) This mode allows you to deactivate the Cat Sensor for 8 hours so the unit will not cycle automatically. Sleep Mode is useful for units located in bedrooms or areas where you may not want the unit to cycle for a period of 8 hours. The 8-hour period is repeated every 24 hours; the start is ...Phone: 1-877-250-7729 | Hours: 9am – 7pm ET. Email: [email protected]. We have had our Bisque-colored (we just got a Grey LR III) Litter-Robot Open Air for 3 years. Here’s the email that LR sent me that I reference in our “repair” video: If the Litter-Robot 3 cannot find the Dump and/or Home position, the control panel will ...Maltipoo puppies are an adorable and popular choice for many dog lovers. With their cute appearance and friendly temperament, it’s no wonder why so many people are interested in br...Litter-Robot 4: Connect light status (WiFi) Here’s a breakdown of the various lights you can see on your Connect indicator/button: Blue: WiFi is connected, and the unit is ready for the next use. White: WiFi is turned off. Blinking Blue: WiFi is disconnected / reconnecting. Learn more. Blinking Yellow: Unit is in Onboarding Mode. Follow the prompts in the app …